The cheek and lip retractor or wound hook "Middeldorpf" has a total length of 215 mm and a working part size of 20 mm / 22 mm. It is used, for example, for retracting mucoperiosteal flaps, the cheeks, lips, or tongue.
The cheek and lip retractor or wound hook "Middeldorpf" is used, for example, for retracting mucoperiosteal flaps, the cheeks, lips, or tongue.
Cheek and tongue retractorWith saliva ejectorCannula leftDouble
Cheek and tongue retractorwith saliva ejectorCannula rightDouble
Application: Designed for hard-to-reach areas in the mouth, this cheek retractor is characterized by its lightweight design. It is commonly used in open curettage procedures.
The Dr. Simas cheek retractor "Univ. of Caw.-Minne." is particularly well-suited for procedures in the left lateral area, as well as in the molar area and sinus floor elevations. It has a length of 145 mm and a width of 13 mm at the working part.
This Simas cheek retractor 998-23 is particularly well-suited for procedures in the molar area (lateral, right) and sinus floor elevations. It has a length of 145 mm and a width of 13 mm at the working part.
The cheek retractor "University of Cawood-Minnesota" is serrated and has a length of 150 mm and a width of 20 mm.Application: This extremely lightweight cheek retractor was originally developed for hard-to-reach areas in the mouth. Due to its special features, it is commonly used in open curettage procedures.
Cheek retractor "University of Cawood-Minnesota" with a length of 155 mm has a width of 20 mm.Application: This very lightweight cheek retractor was originally developed for hard-to-reach areas in the mouth. It is commonly used in open curettage procedures.
The cheek retractor "University of Cawood-Minnesota" mod. by Dr. Ziv Mazor has a total length of 135 mm and features a grooved (width 12 mm) and a rounded (width 22 mm) working end.Application: This cheek retractor stands out for its exceptionally lightweight design and was specifically developed for hard-to-reach areas in the mouth. Its preferred area of use is in open curettage procedures, where it is commonly favored due to its characteristics.
The cheek and tongue retractor 998-30 "Bishop" is an instrument used in dental surgery. It is used to retract the cheeks and tongue, thereby providing optimal visibility of the surgical area. It features an oval (width 24 mm / 11 mm) and a straight working end (width 23 mm) and has an angled shape.
The flexible retractor 964-3 has a total length of 200 mm and a width of 20 mm. Thanks to its flexibility, the retractor can be customised for surgical procedures.
The wound hook has a total length of 160 mm. The working end is serrated - the width at the serration is 13 mm. The height of the wound hook is 55 mm, and the depth at the working end is 3 mm.Application: The serrated hook Bowlder Henry is used for the treatment of lower wisdom teeth.
The double-angled retractor is used for targeted visualization of the surgical area. It has a total length of 150 mm.Working part 1: Width at the top: 19.5 mm | Width at the middle: 12.5 mm | Length: 26.0 mmWorking part 2: Width at the top: 10.5 mm | Width at the middle: 5.8 mm | Length: 20.0 mm
The 999-6 "devemed" retractor is an instrument used in surgery for precise tissue retraction and vision enhancement. The curved end of the retractor allows for smooth and controlled retraction of tissue, resulting in improved visibility during surgical procedures.
The wound hook "Emos" in devemed F-LINE SUPER LIGHT design has a length of 171 mm and features a working part width of 8 mm and a working part length of 20 mm.Application: The double-angled retractor is used for targeted visualization of the surgical area.
The wound hooks "Farabeuf" 998-13 are available in a set of two. Each hook has two working ends: 11 mm & 13 mm width.Wound Hook 1: Height of working end 1: 34 mm | Height of working end 2: 37 mmWound Hook 2: Height of working end 1: 30 mm | Height of working end 2: 33 mm
The wound hook "Kocher-Langenbeck" #2 is curved downwards and has a length of 215 mm. The working end has a length of 25 mm and a width of 6 mm.
The wound hook "Kocher-Langenbeck" #2 969-30 has a length of 215 mm and is bent downwards. The working end is 35 mm long and 11 mm wide.
The "Kocher-Langenbeck #2" retractor has a total length of 215 mm and a working part with a length of 55 mm and a width of 11 mm. The retractor is bent downwards.
The modified wound hook 969-80 "Kocher-Langenbeck" is curved downwards and has a total length of 165 mm. The working part is 45 mm long and 10 mm wide.
Retractors and retractors
The instruments in this category are designed to improve visibility and access to the surgical field by holding soft tissue safely and gently. Our retractors and retractors are available in different sizes to provide optimal customization for specific application needs.
We offer instruments named after well-known authors such as Langenbeck, Kocher, Obwegeser, Müller or Farabeuf. These models are established and well-known in dentistry due to their longevity. In addition to the standard designs, models with upward curved tips are available to provide improved access and visibility in certain surgical situations.
Depending on your preference and the requirements of the procedure, you can choose between single-ended and double-ended instruments to allow flexibility of use. Our selection includes specialized cheek retractors such as those named after Middeldorpf, Minnesota and Cawood-Minnesota, which are specifically designed for retraction and stabilization of the cheeks during dental procedures. These instruments are very useful for retraction and stabilization of the vestibule and tongue during surgical procedures to ensure clear vision and safe access.
Depending on the specific needs of the procedure, we offer both smooth and serrated models to allow customization to the nature of the soft tissue or exposed bone and the requirements of the surgery. For maximum flexibility and adaptability to different surgical situations, we carry bendable retractors that can be customized according to the patient's anatomy.
