Needle holder "Olsen-Hegar" | 2-0 - 4-0 | straight | with scissors | ring handle | tungsten carbide | 170 mm
This needle holder is the longer version in this series with a total length of 170 mm, making it particularly suitable for suturing in the distal or posterior oral area. Behind the jaws, there is a built-in pair of scissors, eliminating the need to switch between instruments and allowing excess suture material to be cut directly. Tungsten carbide (TC) inserts are embedded in the jaws to provide the instrument with longevity and a firm grip on the needle. Easy opening and closing of the instrument is facilitated by the ring grip. This grip also houses the lock for stepwise adjustment of pressure on the needle. This needle holder is intended for suture sizes ranging from 2-0 to 4-0.
Product number:
1084-17
Needle Holder "Ryder" | 4-0 - 6-0 | slim jaws | lock | ring grip | Tungsten carbide | 130 mm
The "Ryder" needle holder is suitable for micro-surgery due to its fine jaws and can handle suture sizes from 4-0 to 6-0. The jaws of this needle holder are parallel and set off at the transition to the end of the instrument. It contains slim tungsten carbide inserts, which increase durability and ensure a secure hold on the needle. With its total length of 130 mm, this needle holder is generally one of the shorter models. The ring grips allow for comfortable operation and easy opening and closing of the instrument. The lock is also located on the rings of the grip for adjusting the pressure on the needle and securing it in the jaws.
Product number:
1082-13
Micro needle holder "Barraquer" | 5-0 - 6-0 | curved | 1.2 mm | with ratchet | 150 mm | F-LINE
The Barraquer micro needle holder with ratchet is particularly suitable for periodontal surgery. It enables minimally traumatic and minimally invasive suturing, which is frequently used for free mucosal transplants and shifting flaps in the apical and lateral region. The curved shape makes it easy to reach areas that are more difficult to access and increases the flexibility of the area of application. The "pivot-curved" closure prevents the suture material from getting caught in the instrument and tearing off, while the round handle ensures easy handling. Recommended for thread sizes 5-0 to 6-0 with a jaw thickness of 1.2 mm. The micro needle holder comes in the F-LINE ROUND SOLID design and is equipped with carbide inserts (TC inserts) in the jaws. With its length of 150 mm, this micro needle holder is one of the shorter versions. Due to this length, it is often popular with practitioners with smaller hands. Compared to Castroviejo micro needle holders, for example, the Barraquer micro needle holders are characterized by the external spring, which means that the actual handle length is shorter and the instrument is therefore lighter overall compared to a Castroviejo needle holder of comparable length.
Product number:
1086-11 F
Micro needle holder "Barraquer" | 5-0 - 6-0 | curved | 1.2 mm | with ratchet | 171 mm | F-LINE
The Barraquer micro needle holder with a length of 171 mm is particularly suitable for periodontal procedures thanks to its fine jaw. The built-in ratchet allows the instrument to engage and lock in place to fix the needle at the working end. Its curved shape makes it possible to work in hard-to-reach areas of the oral cavity and offers optimum flexibility for many areas of application. Due to the fine suture material that can be used with this needle holder, minimally invasive suturing and low tissue trauma are possible. The "pivot-curved" closure prevents suture material from getting caught during suturing. The F-LINE ROUND SOLID design gives the instrument an aesthetic appearance on the one hand and a good weight for comfortable holding during treatment on the other. Thread sizes from 5-0 to 6-0 are recommended for this micro needle holder. The jaw thickness is 1.2 mm, making this needle holder the widest version in this series. Hard metal inserts (TC inserts) are installed in the working end for a particularly long service life.
Product number:
1086-21 F
Micro needle holder "Barraquer" | 5-0 - 6-0 | straight | 1.2 mm | with ratchet | 171 mm | F-LINE
With a width of 1.2 mm at the tip of the jaw, this Barraquer micro needle holder is the widest version in this series. The needle holder is equipped with an internal rotation lock to ensure that the needle is held securely with a latching function. At the same time, there are carbide inserts (TC inserts) in the working part, which give the instrument a particularly long service life.Application: Due to the fine working part compared to standard needle holders, the micro needle holder is designed for the use of 5-0 and 6-0 suture material and is therefore ideally suited for periodontal surgery. With the "pivot-curved" closure, the suture material remains securely in the instrument without tearing or snagging, while the round handle of the F-LINE ROUND SOLID design ensures easy handling and balanced weight distribution. The 171 mm overall length not only ensures that this instrument can also be used in deep oral regions, but also that the needle holder can be easily accommodated in washtrays.
Product number:
1086-20 F
Micro needle holder "Barraquer" | 5-0 - 6-0 | with ratchet | 150 mm | F-LINE
The Barraquer micro needle holder with its length of 150 mm is particularly suitable for smaller hands and is especially light in comparison due to its external spring. The ratchet allows the suture material to be held securely in the jaws. This is equipped with carbide inserts (TC inserts) for particularly good resistance to abrasion and grip. This model is suitable for suture strengths 5-0 and 6-0, which makes it suitable for periodontal surgery. The straight shape allows the needle to be picked up equally on both sides without having to change grip or turn the needle holder. The jaw thickness of 1.2 mm is one of the largest in this series. Thanks to the "pivot-curved" closure, the suture material does not get caught on the instrument and glides over it without tearing off while the thread is being looped. The design corresponds to that of the F-LINE ROUND SOLID, which stands for aesthetic appearance and ergonomic weight distribution.
Product number:
1086-10 F
Micro needle holder "Barraquer" | 5-0 - 8-0 | curved | 0.8 mm | with ratchet | 150 mm | F-LINE
The Barraquer micro needle holder with a jaw thickness of 0.8 mm in a curved design is ideally suited for microsurgical treatments with suture thicknesses between 5-0 and 8-0. The ratchet allows the needle holder to be locked in place, thus ensuring a secure grip of the needle and preventing it from twisting. Its curved shape enables suturing even in inaccessible areas. The "pivot-curved" closure prevents the suture material from getting caught or torn off at the end of the instrument, while the round handle ensures easy handling. Its hard metal inserts (TC inserts) ensure a long service life with a reliable grip of the needle. This needle holder comes in the aesthetic F-LINE ROUND SOLID design. With a total length of 150 mm, this microneedle holder is one of the shorter versions in this series.
Product number:
1086-31 F
Micro needle holder "Barraquer" | 5-0 - 8-0 | curved | 0.8 mm | with ratchet | 171 mm | F-LINE
This Barraquer micro-needle holder has a curved working part so that it can also be used in areas of the oral cavity that are difficult to reach. Combined with its overall length of 171 mm, it is very versatile and a good all-rounder for fine suturing work with material from 5-0 to 8-0. At the same time, it is ideal for periodontal treatments using minimally invasive suturing of the gingiva. Equipped with a ratchet, the needle can be fixed in the mouth of the instrument, which prevents the needle from twisting. The tungsten carbide inserts (TC inserts) embedded in the jaw also ensure additional stability and grip on the needle as well as a long service life due to reduced wear in the jaw. The "pivot-curved" clasp prevents suture material from getting caught in the end of the instrument or tearing on a sharp edge during the sewing process. The F-LINE ROUND SOLID design ensures an aesthetic appearance and balanced weight distribution of the instrument. With a jaw width of 0.8 mm, the micro needle holder is in the middle of the range.
Product number:
1086-41 F
Micro needle holder "Barraquer" | 5-0 - 8-0 | straight | 0.8 mm | with ratchet | 150 mm | F-LINE
The Barraquer micro needle holder with a 0.8 mm wide jaw represents the medium jaw width from this series. The ratchet is suitable for optimally fixing the needle in the working end and preventing the needle from twisting. This micro needle holder is therefore very suitable for periodontal surgery. Its straight shape allows the needle to be held in the same position without rotating the needle holder. The pivot-curved closure prevents the suture material from catching and tearing off the instrument and enables smooth gliding along the end that connects the two halves of the needle holder. The F-LINE ROUND SOLID handle not only looks good, but also gives the instrument a good balance in the hand. The fine micro needle holder is recommended for thread sizes 5-0 to 8-0. The carbide inserts (TC inserts) give the instrument durability and a good grip on the needle.
Product number:
1086-30 F
Micro needle holder "Barraquer" | 5-0 - 8-0 | straight | 0.8 mm | with ratchet | 171 mm | F-LINE
This Barraquer micro needle holder is equipped with carbide inserts (TC inserts) to ensure both a long service life and a secure grip of the needle. The built-in ratchet allows the needle to be fixed in the mouth of the instrument without having to apply permanent force. The possibility of using suture material between 5-0 and 8-0 makes this needle holder particularly suitable for parosurgery. With a jaw thickness of 0.8 mm, this model is in the mid-range of this series. With its 171 mm, the micro needle holder fits perfectly into our washtray system and allows work in the area up to the molars and retromolar. The straight shape enables uniform gripping of the needle from both sides without having to turn the needle holder. The "pivot-curved" closure prevents the suture material from catching or tearing during the suturing process. This ensures smooth gliding in the area of the end where the two halves of the needle holder are joined together. This needle holder comes in the elegant and weight-balanced F-LINE ROUND SOLID design.
Product number:
1086-40 F
Micro needle holder "Barraquer" | 7-0 - 8-0 | straight | 0.6 mm | with ratchet | 171 mm | F-LINE
With a jaw width of 0.6 mm, this micro needle holder is the finest instrument in this series. This fine working end allows working with seam thicknesses from 7-0 to 8-0. This makes this model very suitable for periodontal surgery. The built-in ratchet allows the needle holder to be fixed in its position when closed. This gives the needle a good hold in the mouth, which is reinforced by the diamond-coated jaw parts. The straight shape allows the needle to be gripped on the same side without turning the needle holder. The "pivot-curved" closure prevents tearing or snagging of suture material during the sewing process or when knotting the suture material. F-LINE ROUND SOLID design stands for an attractive appearance of the instrument with good weight distribution. With an overall length of 171 mm, the instrument is ideal for working in deeper regions of the oral cavity and fits perfectly into our tray system.
Product number:
1086-60 F
Micro needle holder "Barraquer" BLACK EDITION | 5-0 - 6-0 | curved | 1.2 mm | with ratchet | 171 mm | F-LINE Kopie
The Barraquer micro needle holder BLACK EDITION is particularly suitable for periodontal procedures thanks to its fine jaws. It is identical to the 1086-21 F needle holder, but also has a high-quality, elegant black coating.
The micro needle holder has an in-built ratchet which allows the instrument to engage and lock in place.Its curved shape makes it possible to work in hard-to-reach areas of the oral cavity.
Thanks to the fine suture material that can be used with this needle holder, minimally invasive suturing is possible with minimal tissue traumatisation. The special ‘pivot-curved’ closure prevents the suture material from getting caught during the suturing process. It is ideal for thread thicknesses from 5-0 to 6-0 and has a jaw thickness of 1.2 mm. Durable carbide inserts (TC inserts) are integrated into the working end to ensure particularly high resistance. Advantages over conventional micro needle holders:Particularly scratch-resistant and hard due to diamond-like carbon coatingExcellent contrast in the oral cavityEven easier to clean thanks to smooth, hard surfaceGlare-free - without annoying reflections, especially when using magnifying glassesLonger service life and less wearBiocompatible coatingSignificantly lower coefficient of friction than stainless steelThe F-LINE ROUND SOLID design gives the instrument an aesthetic appearance and at the same time offers a balanced weight for comfortable handling during treatment.
Product number:
1086-21 FBC
Only 10 available
-27.2%
Micro needle holder "Castroviejo" | 140 mm
Micro needle holder "Castroviejo" 140 mm CurvedWith lockTC
Product number:
1096-2
Micro needle holder "Castroviejo" | 4-0 | straight | 2.2 mm | with ratchet | 150 mm | F-LINE
The Castroviejo-Genon micro needle holder is designed to be very robust with its 2.2 mm thickness at the jaw tip, which makes it suitable for suture material with a 4-0 thickness. This makes it the micro needle holder that can hold the thickest suture material compared to the others. A total length of 150 mm makes it particularly manageable for smaller hands. The ratchet fixes the needle firmly between the hard metal inserts (TC inserts) inserted in the jaw, which makes twisting of the needle and further application of force by hand unnecessary. The inwardly installed spring prevents damage to the glove and ensures a solid grip over the entire length. This comes in the F-LINE ROUND SOLID design, which, in addition to its attractive appearance, also ensures a balanced weight ratio. The "pivot-curved" closure ensures that the thread does not snag or break when the sling is knotted.
Product number:
1088-10 F
Micro needle holder "Castroviejo" | 5-0 - 6-0 | straight | 1.2 mm | with ratchet | 171 mm | F-LINE
The Castroviejo micro needle holder differs fundamentally from the Barraquer micro needle holder due to the external ratchet. This reduces the overall weight in direct comparison. A ratchet allows the needle to be held firmly in place without applying any further force to the hand, which makes working less tiring. Working with suture material between 5-0 and 6-0 allows the instrument to be used for periodontal treatments. The straight shape of the jaw can grip needles from both sides equally without turning the needle holder. With a thickness of 1.2 mm at the tip of the jaw, this model is one of the largest in its series. It is also equipped with carbide inserts (TC inserts) for durability and a good grip of the needle in the jaw. At the end (part where the two halves of the instrument are connected by a screw) there is a "pivot-curved" closure that prevents the suture material from getting caught in the instrument and tearing off. The round handle ensures easy handling, while the F-LINE ROUND SOLID design ensures a balanced weight ratio.
Product number:
1087-20 F
Micro needle holder "Castroviejo" | 5-0 - 8-0 | straight | 0.8 mm | with ratchet | 171 mm | F-LINE
The Castroviejo micro needle holder is equipped with a ratchet for secure fixation of the needle. In combination with the tungsten carbide inserts (TC inserts), this ensures optimum retention of the needle in the mouth. Furthermore, the TC inserts give the instrument a longer service life due to reduced wear in the jaw.The ability to accommodate suture material from 5-0 to 8-0 makes this micro needle holder ideal for periodontal surgery. Its straight shape allows the needle to be grasped evenly from both sides without having to turn the needle holder. The "pivot-curved" closure ensures a rotated end of the instrument, which means there are no sharp edges that could cause the suture material to catch and tear. The jaw thickness is 0.8 mm, which makes this model the medium size in this series. The round handle in F-LINE ROUND SOLID design ensures balanced weight distribution and an aesthetic appearance on the instrument.
Product number:
1087-40 F
Needle holder "Crile-Wood" | 2-0 - 4-0 | straight | ring handle | carbide | 180 mm
This model represents the longer version of the "Crile-Wood" needle holder, measuring 180 mm. This length allows for better reach into the posterior areas of the oral cavity. It is also designed for suture sizes ranging from 2-0 to 4-0. The longer branches make it easier to close the jaws thanks to the longer leverage. The ring grips also facilitate easy opening of the needle holder. The lock mechanism allows for adjustment of the force applied to the needle. Tungsten carbide inserts ensure a firm hold on the needle and contribute to longevity by minimizing wear and tear.
Product number:
1099-18
Needle holder "Crile-Wood" | 2-0 - 4-0 | straight | ring handle | tungsten carbide | 150 mm
The "Crile-Wood" needle holder, measuring 15 cm in length, is a model frequently used in surgical practices. It is distinguished by its compact design and its relatively long jaws, which are equipped with tungsten carbide inserts. The ring grip allows for comfortable handling and easy opening and closing of the instrument. The accompanying lock provides various gradations for needle fixation. The pyramid-shaped imprint of the tungsten carbide inserts offers good needle hold and increased durability for the instrument. With its straight jaws, it is a proven tool for surgical sutures ranging from sizes 2-0 to 4-0, making it suitable for coarser sutures.
Product number:
1099-15
Needle holder "De Bakey" | 4-0 - 6-0 | straight | ring handle | tungsten carbide | 160 mm
Application: The "De Bakey" needle holder is suitable for suture material from 4-0 to 6-0, which also makes it suitable for microsurgical procedures.
With a length of 16 cm, it is in the medium range. The ring handle gives the surgeon good control over the instrument. Compared to other needle holders, the mail runs parallel and is fitted with carbide inserts (TC insert). This provides the necessary support for the needle in the mouth and protects the instrument from rapid wear. Between the rings of the handle there is an adjustable ratchet, which allows the needle to be held in the mouth without the need for additional force and can be easily released again.
Product number:
1091-16
Only 8 available
Needle holder "Derf" | 2-0 - 4-0 | straight | ring handle | carbide | 120 mm
The needle holder, named after its inventor "Derf", has a total length of 12 cm, which makes it very compact. The ring handle makes the needle holder comfortable to handle. The instrument has hard metal inserts (TC inserts) for secure gripping of the needle without it twisting, which also increase durability by reducing abrasion. This jaw allows working with suture material from 2-0 to 4-0. There is also a lock between the rings, which allows the needle to be fixed in the working part.
Product number:
1090-12
Only 10 available
Needle holder "Halsey" | 4-0 - 7-0 | straight | ring handle | tungsten carbide | 135 mm
The "Halsey" needle holder, with its length of 13.5 cm, is a very compact model. Capable of using suture materials from 4-0 to 7-0, this instrument finds universal application in various surgical treatments, up to micro-surgery. The ring grip provides the surgeon with good control over the instrument, and the lock integrated into the rings allows the needle to be gripped and fixed at different stages. Tungsten carbide inserts give the instrument the necessary longevity of the jaws due to less wear compared to models without such inserts.
Product number:
1099-13
Only 7 available
-8.8%
Needle holder "Hösel" | 2-0 - 4-0 | straight | 2.0 mm jaw | ratchet | tungsten carbide | 210 mm
The "Hösel" needle holder has a total length of 21 cm. The particularly long handle branches create a large leverage effect, allowing the needle holder to be operated with little effort. The 2 mm thick jaw allows thread sizes from 2-0 to 4-0 to be used. In addition, the jaw is fitted with carbide inserts (TC inserts) to make it particularly resistant to abrasion and to hold the needle securely without twisting. Another special feature is the ratchet, which has been moved inwards to prevent the glove from becoming trapped. The spring of the instrument is located between the branches.
Product number:
1085-21
Needle holder "Lichtenberg-Ryder" | 3-0 - 4-0 | curved | 1.5 mm | ratchet | tungsten carbide | 165 mm
The "Lichtenberg-Ryder" is a needle holder with a branch handle measuring 165 mm in total length. An inward-offset lock prevents glove damage during treatment and allows the needle holder to lock at various stages. The lock is released by further squeezing the branches. This feature keeps the needle in position and prevents it from twisting during stitching and guiding. Additionally, there is a double spring between the branches, providing a good tactile feel for closing the needle holder as it has no friction points on the instrument and is easier to operate than a single spring design. This model has a curved tip, making it possible to work in hard-to-reach areas. The tungsten carbide inserts used improve durability and provide the necessary friction to hold the needle. The needle holder has rounded edges at the closure to prevent snagging or tearing of the suture material. This model is suitable for thread sizes 3-0 and 4-0.
Product number:
1098-31
Only 7 available
Needle holder "Lichtenberg-Ryder" | 3-0 - 4-0 | straight | 1.5 mm | ratchet | 165 mm
The needle holder "Lichtenberg-Ryder" in 16.5 cm length with a straight jaw of 1.5 mm diameter and double spring is an instrument for holding surgical suture material and surgical needles. The jaws are fitted with carbide inserts to give the needle holder a long service life. It allows precise holding and fixation of needles during surgery and is suitable for suture thicknesses 3-0 - 4-0. The special internal circulation lock prevents the glove from being damaged. The curved edges in the area of the jaw prevent the thread from breaking off due to snagging.
Product number:
1098-30
Needle Holders for All Dental Surgery Applications
Explore our diverse selection of needle holders, specifically designed for the precise demands of dental surgery. Our "Needle Holders" category provides high-quality instruments essential for the safe and effective handling of needles during dental suturing and other surgical procedures.
In this range, you will find:
- Micro Needle Holders: Ideal for the finest surgical tasks and precise suturing techniques in microsurgery. Our micro needle holders are specially designed for handling very small needles, allowing for exact control and stability. They are perfectly suited for delicate procedures where precision is crucial. This selection is particularly popular for periodontal procedures, where very fine suture material is used.
- Standard Needle Holders: These are intended for general use in dental surgery and offer durability and reliability for a wide range of suturing applications. Standard needle holders are available in various lengths and handle configurations to meet the needs of all dental professionals.
Each needle holder in our assortment is made from high-quality materials to ensure longevity and reliable function. They are designed to maximize user comfort and ergonomics, allowing for precise and fatigue-free application. The specially developed gripping surfaces ensure a firm hold on the needle, while the precise mechanics guarantee a smooth and controlled needle movement.
